Pedestal Bowl Silicone Mould

Name: Artriso Pedestal Bowl Silicone Mould
Brand: Artriso
SKU: SM-PEDESTAL
Price: 549.00 INR
Availability: OutOfStock

Rs. 549

Rs. 549 Rs. 599

Out of stock

Cast elegant pedestal bowls in Calso eco resin or concrete with the Artriso Pedestal Bowl Silicone Mould. The raised pedestal form produces a sophisticated, gallery-quality piece — ideal for trinket trays, jewellery holders, and decorative bowls.

Seal with Artriso GlazeSeal for a high-gloss ceramic-like finish, or Artriso Stone Wax for a warm natural look.

✓ Compatible with Calso eco resin, concrete & plaster
✓ Elegant pedestal form
✓ Flexible — easy demoulding
✓ Reusable
✓ Free shipping above ₹2,999

1. Prepare
Place the silicone mould on a flat, level surface. No release agent required — Calso eco resin releases cleanly from silicone.

2. Mix Calso One
Mix Calso One at a 3:1 ratio by weight (powder to water). Add Artriso Pigment if desired.

3. Pour
Pour the mix into the mould slowly to avoid trapping air bubbles. Tap the mould gently on the surface to release any bubbles.

4. Set
Allow to set for 30–45 minutes.

5. Demould
Gently flex the silicone mould to release the piece. For complex shapes, peel the mould back gradually rather than pulling straight up.

6. Finish
Sand any rough edges. Allow to cure for 48–72 hours. Seal with Artriso Stone Wax, GlazeSeal, or Liquid Glass Varnish.

Care: Wash the mould with warm soapy water after use. Avoid sharp tools that could cut the silicone.