Bow Trinket Tray Mould

Name: Artriso Bow Trinket Tray Silicone Mould
Brand: Artriso
SKU: SM-BOW-TRAY
Price: 399.00 INR
Availability: InStock

Rs. 399

Rs. 399 Rs. 499

9 left

Cast beautiful bow-shaped trinket trays in Calso eco resin or concrete with the Artriso Bow Trinket Tray Silicone Mould. The classic bow form creates an elegant jewellery dish or vanity tray — works beautifully in Brilliant White with marble pigment effects.

✓ Compatible with Calso eco resin, concrete & plaster
✓ Flexible — easy demoulding
✓ Reusable
✓ Free shipping above ₹2,999

1. Prepare
Place the silicone mould on a flat, level surface. No release agent required — Calso eco resin releases cleanly from silicone.

2. Mix Calso One
Mix Calso One at a 3:1 ratio by weight (powder to water). Add Artriso Pigment if desired.

3. Pour
Pour the mix into the mould slowly to avoid trapping air bubbles. Tap the mould gently on the surface to release any bubbles.

4. Set
Allow to set for 30–45 minutes.

5. Demould
Gently flex the silicone mould to release the piece. For complex shapes, peel the mould back gradually rather than pulling straight up.

6. Finish
Sand any rough edges. Allow to cure for 48–72 hours. Seal with Artriso Stone Wax, GlazeSeal, or Liquid Glass Varnish.

Care: Wash the mould with warm soapy water after use. Avoid sharp tools that could cut the silicone.