Artriso Liquid Glass Varnish

Rs. 199

Rs. 199 Rs. 299

In stock

Elevate your artistry with Artriso Liquid Glass Varnish. This professional-grade coating delivers a deep, crystal-clear shine that mimics the depth of real glass.

Two Ways to Use

As a High-Gloss Top Coat — Apply thin coats over cured eco resin or concrete for a "wet-look" mirror finish. Crystal-clear and non-yellowing.
As a Metallic Medium — Mix with Artriso Mica Powder to create a flowing metallic paint for edges and detailing.

The "Wet-Look" Mirror Finish — Significantly higher gloss than standard sealers.
Diamond-Hard Protection — Water-resistant shield against UV, moisture, and daily wear.
Artist-Friendly Formula — Water-based, non-VOC. Stays clear, won't yellow. Can be diluted up to 10% with water.

Size: 50ml concentrated formula
Finish: Ultra High-Gloss / Wet-Look
Clean Up: Warm soapy water — wash brushes immediately

✓ Ultra high-gloss "liquid mirror" finish
✓ Works as metallic medium with mica powder
✓ Water-based & non-toxic
✓ Free shipping above ₹2,999

Method 1: As a Metallic Medium

1. Mix: Dispense a small amount of Liquid Glass onto a palette. Add Artriso Mica Powder directly into the medium.
2. Blend: Stir gently to combine. The formula suspends pigments evenly for a streak-free metallic paint.
3. Paint: Use a detail brush to paint edges, rims, or intricate patterns on your piece.

Method 2: As a High-Gloss Varnish

1. Prepare: Use a high-quality soft brush or sponge to avoid brush marks.
2. Apply: Apply a thin, even layer to the surface. Do not flood the piece.
3. Pro Tip: Two very thin layers provide a better "liquid mirror" finish than one thick layer.
4. Layer: Allow the first coat to dry for 1 hour. Apply a second thin coat to maximise visual depth and protection.

Technical Notes:
- Dilution: For very fine glazing, dilute with up to 10% water.
- Clean Up: Wash brushes immediately with warm, soapy water before the product cures.