Calso One Discovery Kit

Rs. 1,499

Rs. 1,499 Rs. 1,899

10 left

CALSO ONE™ DISCOVERY KIT

Everything you need to start casting — curated and ready to go. From unboxing to your first professional piece in under an hour.

The Artriso Discovery Kit is a complete system designed to remove the guesswork from eco-resin artistry. Whether you’re launching a home decor business or exploring a new creative medium, this kit provides the elite materials and technical guidance needed for a porcelain-smooth, stone-hard finish from your very first pour.

WHAT’S INSIDE THE KIT

THE BASE: 1kg CALSO ONE™ (500g Brilliant White + 500g Off White). Experience the two pillars of our system. Enough for 8–10 small pieces.
THE COLOR: 3 x Studio Pigments (Obsidian Black · Umber Brown · Ember Red). Our most versatile "Modern Earthen" palette.
THE FORM: 1 x High-Tear Silicone Mould. Choose between our Bubble Oval or Bubble Heart tray.
THE PROTECTION: The Sealer Duo. Includes GlazeSeal (High Gloss) and Stone Wax (Natural Matte) to master every finish.
TOTAL VALUE: ₹1,899 worth of professional materials in one curated set.

WHY CHOOSE THE DISCOVERY KIT?

FAST CURING: Demould in just 30–45 minutes. Start your next project the same day.
NON-TOXIC: Water-based and VOC-free. Safe for home use, no mask or specialized ventilation required.
CLIMATE-CALIBRATED: Formulated specifically for the Indian climate to ensure a consistent, crack-free matte finish.
ZERO WASTE: Materials are perfectly portioned for your first few studio projects.

HOW IT WORKS

MIX 3:1 (Powder to Water) → PIGMENT (Add a drop) → POUR → TAP (Release bubbles) → DEMOULD (30 Mins)

— JUST ADD WATER
— 8–10 PIECES PER KIT
— BEGINNER FRIENDLY
— PROFESSIONAL STUDIO RESULTS

1. Measure
Weigh your powder and water separately. Mix at a 3:1 ratio by weight (e.g., 100g powder to 33g water). Use a digital scale for accuracy.

2. Mix
Add powder to water and mix for 1–2 minutes until smooth and lump-free. Add Artriso Pigment at this stage if desired — maximum 2% of total mix weight. Pot life is approximately 5 minutes.

3. Pour
Pour immediately into your mould. Tap or lightly vibrate the mould to release trapped air bubbles.

4. Set
Allow to set for 30–45 minutes. Once firm, gently demould. Sand to refine surfaces and edges as needed.

5. Finish
Allow the piece to cure in a warm, dry place for 48–72 hours before sealing. For best results, seal with Artriso Stone Wax (matte) or Artriso GlazeSeal (high gloss).

Optional: For a more fluid mix and enhanced strength, add 0.1g of Artriso Performance Liquid (sold separately) per 100g of powder to your water before mixing.

Storage: Keep in a cool, dry place away from sunlight. Seal the pouch tightly after each use to prevent moisture absorption.